The UK Babe Channels Forum

I know most of you guys and girls know this stuff. There's new members joining all the time and may not know how to upload and post pictures/avatars. Anyway's I hope someone might find this useful.

For this tutorial we are gonna be using ImageVenue (get it bookmarked )


1. Make sure the image you want to upload is saved on your computer (somewhere you remeber e.g. Desktop).Make sure its in .jpg/.jpeg format and under 3mb in size.

2. Head over to

Code:

http://imagevenue.com

3. Click the the 1st "Browse" button (1). Locate your picture for upload in the "open" pop-up box. Highlight picture and click open. Then select weather your picture is "Family safe" or "Adult content" (2). Then hit the "Send file(s)" button (3).

4. You should see some thing like the following;





5. After a short while uploading you will be presented with a screen like this;





6. Highlight and copy the red image code.

7. Make a new thread/reply on the forum. Write your message. Paste the image code into your "Post a new thread/reply" box;





8. Hit the "Preview Post" button;





9. If you dont see your image in the preview post you will need to copy the Green image code from step 6 instead on the red code (not sure why but sometimes red code works and sometimes only the green code works )

10. Now you an hit the "Post thread/reply button. Jobs a good'un


Hope that helps some of you guys out

Thanks for the guide limpwrist very useful appreciate your efforts.

thanks alot althought its way to long id rather look at hot chicks than make an avatar an jus post the links to sites lool it was still very helpfull 1 rep comin ur way!

limpwrist Wrote:I know most of you guys and girls know this stuff. There's new members joining all the time and may not know how to upload and post pictures/avatars. Anyway's I hope someone might find this useful.

Wish you had posted this excellent info a couple of weeks ago.
It took me a few days working out how to do it for myself.
I use the site below, which works in a similar way.

http://www.imagebam.com

Will give you a rep point for your efforts.

Thanks guys...

BristolRovers Wrote:Great guide limp.

Must have taken a while to get that all together. I am sure some people will appreciate it - even if they don't post. Smile

Yes mate it did take a little while but i have seen a few people ask so thought it would be a good adition to the forum!

gyalis_star Wrote:thanks alot althought its way to long id rather look at hot chicks than make an avatar an jus post the links to sites lool it was still very helpfull 1 rep comin ur way!

It may seem a little long winded mate to start with. After you have done it a couple of times, it only take seconds to complete all the steps!

TheWatcher Wrote:Wish you had posted this excellent info a couple of weeks ago.
It took me a few days working out how to do it for myself.
I use the site below, which works in a similar way.

http://www.imagebam.com

Will give you a rep point for your efforts.

Yes imagebam is another good site along with Pixelup for adding full size images to the forum posts!


Thanks to everyone who rep'd me for this tutorial, apreciated!

Maybe if Admin see it as being a useful thread it could be stickied/pinned?

Question ... I tried using both imagevenue and imagebam, but my images (which were 600 x 320 pxls in size) appeared to be shrunk down to about 160 x 30 pxls when I uploaded them. I'm relatively sure I followed the instructions posted here accurately. But the images appear in the threads roughly the same size as attachments (ie, very small). Any ideas?

Thanks a lot helped in making my first thread

thanks for the guide just sent up my first load of caps thanks to this guide

cheers again

limpwrist Wrote:Hope that helps some of you guys out

thanks limpwrist superb tutorial